WOLF TOOTH 8-BIT KIT ONE
8-BIT KIT ONE
The 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes to keep you rolling to the trailhead or next town. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. The three neatly nest together using magnets and clever machining for compact storage. 8-Bit Kit One has 23 functions between the three multi-tools.
8-BIT PACK PLIERS MULTI-TOOL has 17 functions. On one end of the multi-tool, an 8mm hex swivel head serves as a driver for the bits that are stored inside: flat head #3.5 and phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, and 6mm hex; and T10 and T25 Torx-compatible bits. A spoke wrench and valve core wrench are stored on the back and a rasp is on the inside of the upper handle for clearing sealant from valve stems. On the other end of the multi-tool, pliers for master link installation/removal and tightening/loosening of valve stem nuts.
8-BIT TIRE LEVER + RIM DENT REMOVER MULTI-TOOL has two functions. A slender, ergonomic plastic tire lever is on one end opposite of a machined aluminum rim dent remover. The tire lever will work with all tubed and tubeless tires, while the rim dent remover is compatible with all metal rims.
8-BIT CHAINBREAKER + UTILITY KNIFE MULTI-TOOL has four functions. It has a chainbreaker on one end and a retractable utility blade on the other. The chain tool is operated by an included 3mm hex L key that doubles as a tire plug inserter. A machined slot fits the L key and converts the entire multi-tool into a tire plug inserter, with the forked end of the L key extending outward. The handles of this multi-tool slide open to provide storage for tire plug inserts, a valve core, and a spare mini utility blade. The fourth function is the 16mm chainbreaker head that can be used to tighten a loose crankarm during rides.
Each multi-tool can be paired with any other multi-tool or both. They are sold separately and in this group of three. All existing 8-Bit Pack Pliers are compatible with the two new 8-Bit System multi-tools.
Compatibility
- Presta valve core can not exceed 25.4mm in length (Presta valve core not included)
Tech Specs
Weight & Dimensions:
- 8-Bit Kit One: 171 g - 146mm x 20mm x 28mm
- 8-Bit Chainbreaker + Utility knife Multi-tool: 71 g - 146mm x 20mm x 11mm
- Tire Lever + Rim Dent Remover Multi-tool: 29.5 g - 146mm x 20mm x 8mm
- 8-Bit Pack Pliers: 70 g - 146mm x 20mm x 9mm
Material:
- 7075-T6 aluminum handles, CrV tool steel swivel head, S2 tool steel bits
- High-strength nylon composite tire lever
Max Torque:
- Max torque for 8 mm hex bit – 40 Nm
- Max torque for 4, 5, 6 mm hex bits & T25, T30 bits – 20 Nm
- Max torque for all other bits – 10 Nm
Made in the USA
Patents Pending
WOLF TOOTH AXLE HANDLE MULTI-TOOL BLACK
AXLE HANDLE MULTI-TOOL BLACK
The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth rear axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes.
An O-ring on the inside of the nut that threads into the axle's threaded end locks the Axle Handle Multi-Tool in place so it is secure while riding. This nut is shown in the product photo above and included in the package when purchasing the multi-tool. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet. It was designed for Wolf Tooth axles, though is compatible on other axles that have a threaded end.
Four hex bits are included with the Axle Handle Multi-Tool. Two bits can then be selected to be stored in the back of the tool based on the functions that you use the most. Each bit has two functions. So if you find yourself frequently reaching for the 4mm hex on a multi-tool in your frame bag, the Axle Handle Multi-Tool makes it quickly available and always within reach, without needing to unpack your tool wrap on the trail.
- Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible
- Designed for Wolf Tooth rear axles with a female threaded head-end. Nut to thread into the axle is included
- Available in eight colors to match other Wolf Tooth anodized components and accessories
- Designed, engineered, and machined at Wolf Tooth in Minnesota with 6061-T6aircraft-grade aluminum
Compatibility
-
Designed for Wolf Tooth rear axles with a female threaded head-end
Tech Specs
Weight: 28g
Included: Four bits – Hex 2, 2.5, 3, and 4mm; Torx 10, 25; flat head #3.5 and Phillips #2 screwdrivers (choose for storage in tool) and axle receiver
Material: 6061-T6 aluminum
Made in the USA
WOLF TOOTH PACK PLIERS - MASTER LINK COMBO PLIERS BLACK
PACK PLIERS - MASTER LINK COMBO PLIERS BLACK
An O-ring on the inside of the nut that threads into the axle's threaded end locks the Axle Handle Multi-Tool in place so it is secure while riding. This nut is shown in the product photo above and included in the package when purchasing the multi-tool. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet. It was designed for Wolf Tooth axles, though is compatible on other axles that have a threaded end.
Compatibility
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
- Tire lever not recommended for use on carbon rims
Tech Specs
Weight: 38.5g
Size: 116 mm x 20 mm x 9 mm
Material: 7075-T6 aluminum
Master links are not included
US Patent D886564
Made in the USA
